• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Guangdong, China (Mainland)
  • Brand Name: CIMLINEYA
  • Model Number: CLYP-940I
  • After-sales Service Provided: Engineers available to service machinery overseas
  • Material: Seamless stainless steel

Packaging & Delivery

Packaging Details Standard seaworthy packing or according to customer requirement
Delivery Time 7 to 30 days after receiving the deposit

 

Product Description

Application

This device is used to clean and heat the moisture on the road surfacea after crack grooving.

 

Advantages 

CLYP-940I HAND HELD HEAT LANCE adopt the way of electronic ignition, the burnt gaseous propane (35-207 kPa) with compressed air (70-1035 kPa) in the combustion chamber can generate very high temperature as 1700°C.

 

The combustion chamber and burning pipe is made of copper alloy, and can bear the high temperature at 2000 °C, the furnace chamber is treated with superior handicraft, and still keep good shape even in high temperature working conditions

 

All of the high-pressure air streaming box, combustion gas pipeline, high pressure air pipeline, mixed gas pipeline are made of stainless steel, corrosion-resistant, strong, and longer working life.

 

The air flow rate of high-pressure air, mixed gas and combustion and buring gas can be adjusted through the different valves; both the blowing and drying cracks can work in the same while. But also you can choose the blowing or drying as separate operation through adjustment of valve.

 

Change bores diameter can moderate the air flow, its direction and speed; the best function can be achieved through adjusting the ratio of the propane, the compressed gas and the air in fuel furnace.

 

Parameters

Item

Performance

Heating

Temperature

Up to 1700°C, adopted the flame or non-flame heating optional to remove moisture or humidity

Air pressure

0.4-0.8 Mpa, must be equipped with air compressor

Function

Dry and clean the dust, debris, moisture inside the cracks, to adhesive the sealant in maximum

Material

Made by the complete stainless steel, and treated by the mirro surface & polishing, and electronic ignition (The working life is up to 10000 times), control valves & fittings in cooper, efficiency and safety.

Dimension

L*W*H:1360*180*170mm

Weight

About 6kg

 

 

CLYP-940I Portable hot shot heat lance

 

CLYP-940I Portable hot shot heat lance

 

Crack Sealing FAQ

Top Questions Asked about Asphalt Crack Sealing:

 

What are the primary benefits of sealing cracks?

The primary benefit of sealing cracks is the reduction of cost in future asphalt repairs, as well as increasing the longevity of your existing asphalt pavement.

 

Can all cracks be sealed?

No, not all cracks can be sealed. When pavement starts to become alligatored, sealing the cracks is no longer a useful repair method. This type of damage is beyond the ability to repair.

 

When should asphalt pavement be crack sealed?

As soon as cracks are noticed and larger than 3 mm in width they should be sealed. As far as time of the year goes, cracks should be sealed before the rainy weather hits. The idea is to keep water from penetrating into your sub grade layer of your asphalt.

 

Are cracks of all sizes able to be sealed?

No, not all cracks, but most cracks under 3 cm can be sealed. Cracks under 3 mm can also be ignored, as regular sealcoating material will typically fill these small cracks in.

 

How do I repair cracks over 3 cm in width?

Cracks over 3 cm in width should be repaired using hot mix material instead of crack sealing materials.

 

What is the optimal temperatures to apply crack seal?

The optimal temperatures to apply crack seal are above 7 degree centigrade.

 

How is crack sealing applied?

Crack sealer material is pre-melted in a large pot called a kettle, and then pumped to a wand with a banding pot at the end. The liquid material fills the small receptacle and creates a 2 - 5 cm band over the crack as it is pulled.

 

What affects the price of crack sealing?

Factors that can add to the cost of sealing include the overall condition of the pavement. The proximity of your cracks, the amount of preparation work required to apply the sealer, and the width and depth of cracks.

 

How much crack sealing can you do in a day?

By use ESUN crack sealing machines, most of our customers can install between 2,000 and 6,000 linear meters per day.

 

How soon can I drive on a freshly sealed crack in a asphalt pavement?

It is recommended to give crack seal material as much time as possible to dry. There are some techniques that can be employed to allow this to happen faster.

 

Will the crack sealer material track into my buildings?

The answer is yes. Freshly poured crack seal can be tracked into buildings, cars, sidewalks etc. The best way to avoid this is to have crack sealer applied on days when traffic is reduced as much as possible. If this is not possible another solution is to apply sand over freshly poured crack sealer material to greatly reduce the chances of it tracking.

 

Can crack seal be done on the same day as seal coating?

The longer amount of time you can give between sealing your cracks and applying sealcoating the better. At a minimum we like to see at least 72 Hours between these applications. Crack sealing can be done on the same day, however it will not do as well as the crack sealer that was given the proper amount of time to dry.

 

 What is crack routing?

Crack routing is the act of machine routing cracks to a uniform width and depth before sealant is poured into the cracks. Routing machines cut a 1.5 x 2 cm channel into the crack of the pavement. It is cleaned then sealed. These cuts allow a more uniform application of sealer however they are not always reccomended.

  

What if cracks have moisture in them?

Cracks generally do store moisture and for that reason we use a heat lance to dry those cracks ahead of application to allow proper adhesion of the rubberized materials.

 

Do cracks get completely sealed after a single application of crack sealer?

Most cracks are completely sealed after a single application of crack sealer, however some may require a second application of sealer should product settling occur.

  

Will cracks that are sealed need to be sealed again?

Yes cracks that get sealed will likely need to be sealed again. With time, traffic, and weather cracks in your pavement slowly start to pull apart causing them to open again. Sealing should be considered a part of your routine pavement maintenance plan.

Packaging & Shipping

At ESUN every step of the supply chain is important to us, that is why we put such an emphasis on our shipping services that make every effort possible to ensure your products arrive safely and ready to install. We can help our customers do everything from sending a document, to packing and shipping spare parts, to crating heavy machinery going overseas.

 

Our Services

Service and customers satisfaction is what we care about.  We are reliable and willing to help understanding your needs concerning solutions. Our professional engineers are available to provide you with training and service at any time you need.

 

Marketing

We ESUN attend different exhibitions and trade shows every year to promote our latest road maintenance technology and develop agent, welcome to contact us for the latest trade fair info, and welcome to our booth.

You are also welcome to visit our plant in Zhongshan or Hangzhou to comunicate with us, also we can demonstrate our machines on site for you.

 

Company Information

Welcome to ESUN, a leading supplier of preventative pavement maintenance in China. Since 1999 ESUN has supplied the pavement preservation industry with quality products including sealant, patching products and related application equipment. For all your pavement preservation needs, ESUN is the source, with facilities strategically located around the China and distributed worldwide.

 

Contact

Tel. Number: 0086-760-88722007

Mobile Phone: 0086-13924989208

Skype: terry4520
Official Site:  www.e-sunhi.com, www.esungd.com

Add.: Jingsan road, Xi'erwei, Ma'an Island, 

Linhai Industrial Park, Cuiheng district,

Zhongshan, Guangdong, China

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
15 Transactions 20,000+
The supplier’s transactions conduted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $47,000
Learn More